Miller-Stephenson offers a diverse line of 2 part epoxy adhesive kits, and RTV silicone sealant/adhesive. These products achieve a specific property or combination of properties on solving customer application problems. They are easy to use, cure quickly and exhibit excellent bond strength for a broad range of materials.
Two-Part Epoxy Adhesive Kit
MS-907 (3.7 oz kit)
Nonflammable No ODC
For bonding metals, glass, ceramics, plastics, wood, rubber, fabrics and concrete. Miller-Stephenson's Epoxy 907 Adhesive System is a two-part, equal volume, room temperature curing system particularly useful for general purpose bonding. Fast setup time. Perfect for in-plant and field use. Develops bond strength to 3,000 psi. NSN 8040-00-144-9729.
Base: Epoxy Resin.
Bond strength To 3,000 psi.
Form: A two-part paste adhesive packaged in equal volume tubes
Color: Part A is blue. Part B is beige. When thoroughly mixed, the resultant color is pale gray
Viscosity: Approximately 120,000 cps, thixotropic.
Mixing ratio: Equal parts by volume
Cure: 24 hours at 77°F(25°C), or 2 hours at 140°F(60°C), or one hour at 180°F(82°C)
Pot life: 20 minutes at 77°F(25°C)
Service Temperature: Up to 180°F(82°C)
Special properties: Good adhesion to a wide variety of surfaces which have not been specially cleaned. Proportioning of Parts A and B not critical. Definite color change during mixing
Shelf life: More than one year at 75°F(24°C)
Product Information
RTV Silicone Sealant Adhesive
MS-900 (150 ml)
Nonflammable No ODC
A one-part, moisture-curing RTV silicone sealant/adhesive that cures to form a tough, permanent rubber seal or bond. It is ideal for protecting, sealing and insulating corrosion sensitive electronic and electrical materials such as copper, brass, silver, etc..
Product Information
5 Minute Set Epoxy Adhesive
MS-905 (50 ml)
Nonflammable No ODC
A versatile and easy to us adhesive. It can be used to bond or repair most materials such as wood, metal, glass, ceramic, plastics, and rubbers. It hardens in 5 minutes with high bond strength and chemical resistance.
Product Information
High Performance Epoxy Adhesive
MS-908 (50 ml)
Nonflammable No ODC
A two-part toughened epoxy adhesive. It is a one to one mix ratio by mass or volume and a long working life. Its creamy texture is sag resistant, making gap filling and application to vertical surfaces possible.
Product Information
Quick Set Epoxy Adhesive
MS-910 (50 ml)
Nonflammable No ODC
A two-component rapid setting epoxy adhesive, which produces strong bonds in a short period of time. Ideally suited for bonding small parts and for repair work.
Product Information
To learn more about our latest formulations, please contact our Technical Service Department.USA:1.800.992.2424 Canada:1.800.323.4621
Nonflammable 
No ODC
